if its the wire from the voltage regulator then its the one that goes to the battery positive terminal and is the one that actuall ...
I bought My bars for $300, Some biltwell Risers for $120.Have been quoted to supply cables and fit everything for $1200.Maybe sour ...
Electrics are our "modern day blessing and our modern day curse" with newer bikes/cars...Will keep investigating electric system, ...
Mate I'll sell you the 110 CVO jugs, pistons, cams, throttle body - I put the 117 kit in both the slim s and low rider s so have 2 ...
just use speaker cable x 2 when I did mine, I cut the connector off & ran the existing cable through the hollow bolts, extende ...
check the oil hot and off the side stand (Upright) sit the dipstick on top of the threads
Ok got it, followed steps in my original post and changed number to my new number.So what I've learnt is that you don't need old P ...
Bringing your own engine oil can help. And most have a loaner bike -- you can ride a few different HD's in the range for a day for ...
Take your foot or fingers off the brake bud!You're welcome! :)
Should be easy enough. I replaced my FXST to a LED tail light, If I remember correctly. I had to undo the wires out of the i ...
Thunder Tech in Mundaring Dean is the guy to see
Ok no worries
Well done Matt, see there is more enjoyment doing it yourself than paying someone else
bloody hell, they must be super tight!
Hi, Does anyone know the part number for the lower brake line to suit 16 Breakout with 2" fork extensions?I have been told that a ...
Yep, good tip. Thanks AJ56.
Got it all sorted now. The sideplates are on the inside of the fender struts in most of the photos I have seen of stock wide glide ...
Not sure if they still make them but in the early days of the current belt drives Harley sold an emergency belt that had a long di ...
Thanks guys, ordered the PV from Fuel Moto, the way the tracking is going should be here by the end of the week. Just in time to p ...
Clever design and looks pretty cool. I'd be a little worried about the wiring getting cooked from sitting between the fins t ...
