Hey thanx ,awesome,I've asked a fair few ppl and they had no idea. Appreciate the ID and lead, awesome, ill give them a call, have ...
Thanks mate. Broken left ring finger (Clutch lever pounded it into the bitumen). Jarred right forearm ,corked right knee. Walking ...
Hey Adz and Hutch, thanks for the advice. Appreciated, Cheers
Aren't words and grammar great?I stayed up at the camp lateI found out I was camp, late.Oh.. I want some information on a cam plat ...
Typical. Take an umbrella and doesn't rain.
Hi all,Just the 2 bolts each side that mount footpeg/footboard brackets to frame. I'm assuming 3/8"? 94 Fatboy.Thanks! ...
Has anyone ever removed the key barrel from a slim/fatboy/deluxe switch housing? I'm thinking of getting mine powder coated but I ...
yep, that will do the trick. They are pricey but not that bad when you look at the costs for a GSXR dampner unit if your mak ...
if its the wire from the voltage regulator then its the one that goes to the battery positive terminal and is the one that actuall ...
I bought My bars for $300, Some biltwell Risers for $120.Have been quoted to supply cables and fit everything for $1200.Maybe sour ...
Electrics are our "modern day blessing and our modern day curse" with newer bikes/cars...Will keep investigating electric system, ...
Mate I'll sell you the 110 CVO jugs, pistons, cams, throttle body - I put the 117 kit in both the slim s and low rider s so have 2 ...
just use speaker cable x 2 when I did mine, I cut the connector off & ran the existing cable through the hollow bolts, extende ...
check the oil hot and off the side stand (Upright) sit the dipstick on top of the threads
Ok got it, followed steps in my original post and changed number to my new number.So what I've learnt is that you don't need old P ...
Bringing your own engine oil can help. And most have a loaner bike -- you can ride a few different HD's in the range for a day for ...
Take your foot or fingers off the brake bud!You're welcome! :)
Should be easy enough. I replaced my FXST to a LED tail light, If I remember correctly. I had to undo the wires out of the i ...
Thunder Tech in Mundaring Dean is the guy to see
Ok no worries
.jpg?v=638867556948700000)
