ended up usin wimmer top filter ext breather set up but its a bit smokey lol while stationary and at low speeds after long run or ...
They have now sent me instructions all ok thanks for the help this Is why I like you cunts cause your all wiling ta have a Say a ...
Good luck with it mate. Let us know how you get on. The only problem with mine is it won't start. Because I'm not on the FKN thin ...
I should say to use the cam bearing puller for wheel bearings you need a few other bits and pieces, A bit of pipe or large socket ...
These smartpartz dudes have an us outlet or is it U.S. only ?
nice recovery!
Thanks heaps! I ended up bending the stock plastic tail section downwards towards the tire and squeezed the retention screw thread ...
Yes , max power to the battery of the bike ( I ALWAYS PUT A BATTERY TENDER ON !! ) , either hard wired or crocodile clipped onto t ...
Not sure of the reliabilty on some of the engines available in the single cam configuration ,S&S 124 weren't to bad but you can st ...
Okay...So your saying that a Turbo suited for a 4.2l Nissan Patrol would be a good match on a Harley engine. Fuck off and do some ...
The Poly ones are very good! Have run them for the past 15 years with no issues.
gday james, welcome to the forum buddy
Installed mine this afternoon and love the results except the new wires are about an inch shorter than the old and too short to re ...
Cheers for the replies. Always the simple things! Loose battery terminals (fingers crossed) seemed to have fixed the problem! Didn ...
Thanks for that info Retroman.- I'll give it a go with the rocker speedo & see what happens. Cheers Wayco.
You want the "Active air" and " Active exhaust" DISABLED IN THE LOADED FILE
I've changed my fatboy to a freight train. I don't know if my experiance would help but PM me if you would like more detai ...
Thanx for your help guys,
forsure if you want to put some bucks into her i hop-up a 2003 softie hole package , motor modification's RB race pipe e ...
Steam cleaning or pressure washing can get in through the clutch cable