That's a shame mate as the twin cams do up nicely. Had my engine worked on a few months ago and am so pleased with the results. An ...
Tat2_u, what baffle mods have you done to your Pro Pipe. I have a 09 Fatty, 103, 625 cams, heads ( Mark Hood Motor services ) and ...
I fitted a steering damper from a GXR1100R to my FXR and it cleared up all mid corner wobbles! The difference was like night and ...
Getting used to the sled. It's a big change from a 1300cc high performance japper. A good one though. Foot boa ...
dont get me wrong, thanks mate for the advice when im up to that part i will see what i like but at least now i know i have ...
I love it! And don't sweat the tyres, you'll be surprised how good they hold into corners in the dry. To it easier in the wet, jus ...
Hylomar
Don't forget there is also a bearing in the pulley/cushdrive hub assembly. That oil/grease may be from this bearing, and there is ...
it is most likely the IAC valve sticking open. Here is a video showing its location & how to clean. https://www.youtube.co ...
Thanks guys.
If you get the WHOLE SHEBANG, headers/Mufflers/brackets/balance pipe AND frame brackets and bolts , then any Heritage/Softail Cust ...
Acousta-Fil sounds like a good product. Can be found on ebay & it is from the UK. - Rob http://www.thermalvelocity.co.uk/Silenc ...
A good result Retroman
hi guys , had new barrels here few weeksago to bore .005 to suit new pistons , these had never been on any engine , th ...
Here's an update on my bike. I replaced to inner primary bearing only and put it back together and the noise is all but gone. the ...
I have a 2012 wide glide fitted with big radius pipes,heavy breather and pro super tuner and was just wondering if anyone else has ...
stock is 40, thats light especialy if you use alloy rim, even lighter. i'm wondering if having 80 holes in the rim it could ev ...
A question I picked up the IPod module but ir had no wiring. If I had the kit, it has a 4 plug harness as part of the kit. & ...
Good stuff yes the welder has its place in getting bearings out or off have done many a time
Give em both barrells Pauly .
