Latest comments

Usually anything aftermarket are better, but its not a matter of just buying anything that looks good. You need to have the spring ...

Its not my opinion above but my experience with running this set up for about two years with a tts tune. And i ride very regularly ...

Ask the question on the wa section and you might get more suggestions inc independent shops etc

Anything can be made to fit. All you need to consider is the width of the guard. T1

What's the point of showing a printout starting from idle? The tuning was finished a print out is only for bragging rights! Lol. 4 ...

There are rarely pipes for sale on gumtree, i know what you mean. A lot of this vance and hines stuff is for later model sport ...

If you are in VIC, perfect time to remove reflectors with the heat we had. Just peeled right off. Glue needs to go ofcours ...

Synthesthesia, another alternative for you to consider is the current sportster custom 1200B. This comes in denim black, the same ...

  So i changed my bars over and here is the results now its time to change the seat to a springer, now the search begins fo ...

China, I get what you're saying, and it depends on the situation. Just trying to get the point across that you can cause problems ...

Are you coming up Dyno? Should organise a get together during the day!?

thanks for the replies guys, i got it back from the shop today. Turns out that the loom had been squashed a bit when it was put to ...

Thanks for that, I installed the 13.8:1 XIED's and the bike runs great, my over run pop 90% eliminated and the bike is much ni ...

Ear plugs!!   But seriously I get a lot of wind noise with a open face helmet as well as exhaust noise. As I get old ...

Thanks Nomada You're a legend mate! Safe riding.

I would suggest checking the tension of drive belt before riding if putting shorter shocks on

On the 2014s, the speedo has a complete housing to it. Surrounds the entire thing. It's like a cup, not just a backing as it was ...

I'm super keen to do this to my 48, just weary about taking the forks apart by myself, Anyone in the Perth area keen on lending a ...

Thanks again for all the input Guys should be able to get my head around it. while im here any specific tools i may need?

Tw while Ike is looking the goods mate.well done