Latest comments

In Townsville that's Townsville Custom Cycles. Cheers for the info. 

Shovels look funny with cv,s on ,

You will probably find more answers re Vrods on 1130cc.com

There is this type that may tilt in behind the pushrods. https://www.ebay.com.au/i/121990179245?chn=ps&norover=1&mkevt ...

do a comp test , clean fuel system proper inc idle and main jets carb fuel delivery etc, check ign system 1st ,first things first& ...

Aaand a few rides later the idle problem reappears. Two days before I'm supposed to ride it to Adelaide. 

Harley say 8,000 klms for the syn3 oil and it would be 4,000 klms for mineral type , i would not leave the oil in there for that m ...

To answer your original question the early and later Breakout wheels are interchangeable. There are new Breakouts around with powd ...

Fob Battery...

Thanks for the comprehensive update Tju. Make sure to post some more pics and ride results when it runs in. Cheers

unless your primer is also a sealer I think I would lay down a sealer first .......Epoxy Primer is what I meant , & a 2K seal ...

I put  one on an early evo and used a  screaming eagle tuners kit. It came with a heap of  jets needles and pilots ...

Picked up an 09 FatBob Friday and all was well, about 200km into the ride home, indicators stopped working, no horn, lost speedo. ...

Thanks for the feedback every one, ill check out the alternator rotor idea . makes sense.

I stumbled across some good info this morning that I hadn't found previously,  looks like it's definitely a no go for a numbe ...

Find a HD authrosied smash repairer. check with a local Dealer. They will have the codes. There is one in Brisbane and they are ab ...

The cheaper lifts are made with a "z" section frame, while the "heavy duty" are made with RHS, something to look ask about, thats ...

as much as i usually stick with makers specs on stuff,running hd engine and trans oils,i have changed to john deere hygard trans o ...

Anyone know if longer wiring harness and clutch cable needed to fit 4” bar risers on 2020 Lowrider.

Cleaned and oiled the filter yesterday. No more spatters on my saddlebags yet. I had a look around the base of the pushrod tubes a ...