I have one ( Seal started to leaK so replaced it.) Do you want the whole thing or just the plug that goes to the Reg. ...
A really good penetration fluid is 50% acetone and 50% tranny fluid. I put it on my rusty header bolts, and they nearly came off w ...
Thanks for that!
Finally found out where the starter relay goes on the FXEF so I thought I would post some photos so that if anyone else needs to k ...
hi guys I have a 96 heritage the right side blinker doesn't work while moving no engine works,stopped engine on works,travelling d ...
Maybe. If it's up for new pads, do the pads first, then look at the level. Park your bike so the master cylinder will not leak o ...
.would probably need to double check beads work by dynamic balancing wheel & tyreBut like fc , I have never noticed the differ ...
If you have a kill switch check all the contacts in the system especially junction on frame between tanks.regards, B.B.
Try the service bulletin first Shave top of mount, then shim with washer. I have the sputhe and only noticed a bit more stabili ...
Nice work!
I still have a thundermax for sale , if i could figure out how to find my old parts for sale i could repost it ??/
In Townsville that's Townsville Custom Cycles. Cheers for the info.
Shovels look funny with cv,s on ,
You will probably find more answers re Vrods on 1130cc.com
There is this type that may tilt in behind the pushrods. https://www.ebay.com.au/i/121990179245?chn=ps&norover=1&mkevt ...
do a comp test , clean fuel system proper inc idle and main jets carb fuel delivery etc, check ign system 1st ,first things first& ...
Aaand a few rides later the idle problem reappears. Two days before I'm supposed to ride it to Adelaide.
Harley say 8,000 klms for the syn3 oil and it would be 4,000 klms for mineral type , i would not leave the oil in there for that m ...
To answer your original question the early and later Breakout wheels are interchangeable. There are new Breakouts around with powd ...
Fob Battery...
