yeah mate...thats what my brother told me. just starting to cool off, then remembered that it will be three weeks before i ride ag ...
Thanks Scotty Originally my curiousity was piqued as some of the big twin calibration files list a sporty ECM part number a ...
The cable is just a generic, Same as most camera's I have to have the 9 volt battery hooked up to mine or I get the same error as ...
Thanks for the input and comments guys, I stick with my S&S's for now.
l took mine out today , since the bikes been running lousy, the filter looked like yours all brown so did the fuel around it with ...
thanks scotty, i reckon you are spot on. Bit hard to tell if mixing screw is the one i have just found though, im pretty sure ive ...
scotty, ive started over from scratch, cleared diag. codes re-installed the t/max . main fuse, on/offx4 .. poor running , black s ...
I was advised by an old timer who raced bikes for 30 years to add a teaspoonful to each tank of 2 stroke in my son's RM125, which ...
Indicator fixed now, broken connection in the indicator itself. Bikes in this week to get the neutral light sorted
Yep, thought of that, but after taking me an hour to make it look all pretty with the tape and hiding the wires behind stuff i'll ...
May or may not be an issue for you PIB but Windows Vista is pretty picky about which USB to serial adapters it will work with. ch ...
Thanks for that, seems to be all good now, I must have got a female SERT.
thanks Scotty - found it all done
Thanks very much Scotty.
I can recommend the guys at Wild West. I took my Sportster to them (when no one else wanted to know me). They are a good bunch of ...
Thanks for you help stix & Scotty, I'm off to the shack to fix the problem. The bike is due for it's 8k service, so I'll hassle ...
All adjusted, worked a treat.
Mate, Take it nice and slow when you do it and all will be ok - if you were in WA I would do it for you GB
You can go down the road of pipes, aircleaner and fuel management or leave it alone altogether. If you change just mufflers for a ...
Hi Skull, Yep, agree with you on the deterioration problem. I usually change the filter every 3d time because of that, should hav ...
