big differance in shipping cost there! id go for the 37's good lift & duration, andrews been making cams for a long time now, good ...
The Shrek sure don't corner to well FYO, no wonder you want to take us out to the wheatbelt all the time. Just so you can ge ...
if you get bout 30mm of 5/16 unf all thread n a couple of nuts take the screws out the side of the top tree lock nut the thread in ...
got it.... im gunna have a crack at it, i know my way around v8's redone a few, theres 6 cylders less , but im under no impression ...
yep thanx shifta, thats all exactly what i was thinking today, should b that easy, test the turn signal housing (or bars) for eart ...
Well,I accessed the cam compartment today.I couldn't remove the timing chain due it having spring loaded tensioner not one like in ...
G'day all, currently running a HD Heavy Breather air filter and would like to fit a smaller air filter. can anyone tell me i ...
just take the bike to a hd dealer n ask em to disable it with digi technition it only takes 2 mins n if your a regular they will p ...
transit mode: with the run switch in on turn the ignition on quickly flick the run switch to off the quickly switch the ignition t ...
if there aint 1 to fit straight on dont try it, ask at your hd dealer, they r to expensive to fuck up, they wont be easy to mod co ...
dont think u will find out cos they dont want you to rebuild them your self
Thanks, wonder if you got my pm with me address
hey thanks scotty, ive got the multi meter, will check when the manual arrives,
Thanks for the photos mate, looks like those brackets have done the job. Might make some up anyway, would rather not scrape the ba ...
not even a pretty face don't ya mean
Have you thought about a 42mm Mikuni pumper ? Also fit a Twin tech or similar adjustable ignition. Had it dynoed yet ?
Have a couple of mates with Vrod's - Night Rod Special. They have the black pipes std to match the bike. I think they lo ...
Cheers guys, I ended up fitting four relays. one for hi beam , one for low beam, one for the start solenoid and one for the ...
Thanks Unc, that looks like a top bit of gear for the workshop. Sure would make it easier on the old back doing a service.
if he actually mapped the PCIII then there should be a huge difference in the table......... when I had mine done they started fro ...
