Has anybody used Chopperworks in Brisbane? Have they been around for a long time? Any comments would be appreciated.
OK, I found the link where I saw the scavanger in action. Just though I would post it FYI. Enjoy. http://www.roguechopper.com/ab ...
Good you mate. Nice job and I don't blame you not going out riding with a cutie like that. Kids are great at that age, remember ...
The IAC will not cause a miss. All it does is allow the idle speed to be raised. You need to remember there are several table in p ...
not sure if this will help, but, to make he seat on the nightster better I had a local trimmer remove the cover, glue & shape some ...
No real idea but maybe it could hold back pump pressure = bad (wind the idle back up to where it's meant to be) ...
Hey I just hijacked my own thread - shit happens
Put on the SuperTrap SuperMeg 2 into 1 on the weekend. Installed the O2 sensors and downloaded the base map NR141-25. Wow what a d ...
Looks like a good starting map Bob
I'll need to book her in then Scotty See if it helps with the fuse problem, and then to sell the Tmax
had a call from the stealer this arvo and having the 103 stage II kit fitted on thursday, (bout bloody time). He is also giving m ...
Thanx all for your input. I changed the torx bolt for stainless allen key bolts - spent big - $3.50; and they look good. I h ...
Thumbs up Scotty..all good now. What I did, 1. Set Cold Idle at around 1350 to 1400rpm according to Tacho 2. Set warm Idle to 9 ...
Hi Scotty, Firstly the Vtune charts that I generate dont show any VE percentages in the throttle position 1 column? I notice the ...
they are only 39 on the outside, so no is the answer 35 ish you would imagine, given 1 or 2 mm wall thickness I used to used gol ...
Ha Ha, yeah Softy, not too much problem on my 03 Ultra. It was great when you set the cruise, sit back watch the world go by and l ...
Have not done a duece, but should be the same, what did to pull a wide glide front end apart, was remove front wheel then undo all ...
Yes lastrain, you missed something. Have you looked at your bike? what you suggest is for adjust the length of the rod.
Mmm....pointy..... Thanks for the pic; I have the Stiletto highway pegs (<== not in that pic obviously) & wondered how big t ...
No complaints here !
