Chopaweeza is correct about the forks-the reason being not only reduced trail,but they have an anti dive feature-everything else i ...
Yes Robo .......green to #3 ( ecu terminal cost $2) ...
Were new pads fitted? If the pads are too tight in the caliper, they can jam on. On older systems, dirt present in the system ...
G'day brendo, As was said by Bangkok Bob on another thread you are looking at 3-4 1/2 for a shop to do the work. How mechanicall ...
As an off chance you could give Blacktown Harley in Sydney a call. They have done lots of Vrods with modified bars over the years ...
Turned out to be a genuine Harley part without the treaded ends.......too easy $22.00
Had the same problem on a Road King. Globe was jiggling in the socket. Might be a long shot, but easy to check.
2nd that BT, I chased a rattle I was sure was either pinging or some sort of valve noise, turned out to be loose exhaust baffle vi ...
Just a bit of an update.......removed PC and removed eliminaters..oxygen sensors back in..back to stock I thought ...but every tim ...
Give me a call, I can help you out. Ian VPW 03 8405 9212
We have Smith build ours as well but not in a taper, we have seen them hit the tubes thus we have ours built in a 3/8 straight, e ...
On another note with the O2 Bungs. After reading Steve post on the position of the sensors, I can understand now. When I run a O ...
I'd save your money until you get the bike and ride it for a while. The motor should be the new 103 balanced, so wait and see what ...
New member to the AU forums here. I run the Shotgun Shock on my bike and have also run Platinum and Hi Lo. The Shotgun is head a ...
^ +1. You will need to retune or you will be running way too lean. You don't want to do that for too long.
Hilly, DVE1 and AJ56 thanks for your help pointing me in the right direction - just one more question for you or someone who may k ...
Chop, Houli, HD, Davo, Filthy & The Don, Onya Boyz......very much appreciated......I will print out the advice and gi ...
Well sitting at the comp looking at the next thing to buy. HB25 the wedge. I like the idea of all the slack taken out of the cha ...
Burto, Thanks for the link. Point taken. Will definitely change the bearings when I decide which cam to fit.
Anyone know of a company that either make baffles for Bassani Sweppers or can make custom baffles? I have a pair on my IRO ...
