So I was sold on the 204's, untill I heard a FB 2012 with the 211's, sold. Bike goes in Friday week, 211's and the V&H Bigshot ...
well i do ride in all weather and prefer the bike under me instead of sliding down the rd away from me and never had a issue w ...
Hi all...78gold,What ever you do,dont take your bike back to the same tuner.
there you go, muffler shop, who would have thought
have you checked under rear guard , had that problem ,the rear tire scrubbed the wireing out
i have this same problem. 90 softail custom. i have replaced the starter relay, everything works but wen i push the start button n ...
if ya got after market pushrods wether or not you take them out they will need to be reset again standard rods have colour on e ...
Well, I took it for about a 3 1/2 hr ride straight down the freeway on Friday arvo, 120+ the whole way, Even pushing it to 1 ...
Your a legend hairy at mate will have to organize hw to swap $$$$ for steel
Hey Rasta. Did you take your bike to Fred yet for a dyno tune?
Yeh i know what you trying to get accross Damage ! but the prob i have found is that the wheel when i fitted it up to the bike wit ...
Upgraded front and rear to Lyndall Gold, which I got from Rollies Speed Shop. Replace the stock line with HEL Performance Braided ...
Folks, some of you will be onto this already, but here's the latest menu for TTS tunes from Kuryakyn for most models http://www.k ...
The SE stuff isn't horrible but not as DIY friendly as others. Plus, you can't call the manufacture with questions.
I've got a set of Peacemakers on my 2010 FXD. They are pretty good. But not perfect. I'd estimate on the closed setting they are ...
So will that work on an 85 Evo? I have a badlander seat to fit a Dyna/Roadie maybe? Part No MILSCO 11-1-425 a fatty rear guard t ...
I should be able to get some photos up in the next few days hopefully. So basically I will need his engine clutch gearbox hell ...
Thanks for help guys. Battery tested good under load. But the problem has gone now. I did about 100km on it and that seams t ...
Sorry guys , took a while to get back , ended up putting a new pump in ( after buying the wrong one first ) & the new pump is grea ...
lighter fluid is the easiest way, it unsticks the glue on non throttle side and grip slides off
