Latest comments

If you know someone that can weld ..... problem solved. It's no rocket science, just make sure it stay's lined up but that is not ...

99 roadking. last of the evos with efi.   backfired the other day on start up. has done odd occasions in the past with n ...

yeh it did cost me 4 bucks for the app, found the same with phone had to ride with hand over it most of the time to see, probably ...

Hi All , the lens on my speedo is scratched and l was hoping to replace the lens and not the whole speedo . Does anyone know if th ...

Thanks for the feedback guys, much appreciated!! Waz

Double check yourself mate , but as far as I know any exhaust system for a Rocker will fit your 2014 Breakout ( or 2013 CVO Breako ...

Thanks everyone for the info. It's the space between the spacer and the fork on the right side (non rotor) side that I am worri ...

I set them at 100 down and they where noisy so I then went 150 down with better results. I might give one turn of the bottom a go ...

Thanks tussuck i always though Pirelli was a really soft compound tyre, well they were on my old busa i never got more than2500klm ...

on mine it was the disc spacing so I had to shim the capiler. take a tape down to the Harley shop and measure a few bikes to see ...

So what work did you do to the bike just prior to the problem starting up?

Here is what you want!.... http://www.ebay.com.au/itm/181232866966?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Cheers ...

Thanks for the feedback ,paulc hellam built the heads , and i had it dyno,ed with the 211,s but not the 585,s as the only dyno sho ...

Could be? at least I didn't loose any oil. Maybe Busted should have read the same advice that I did.

Yeah I got some off eBay a while ago, .5m x 1m x 6mm thick sheet around $30 shipped

with the HPI unit you can use any aircleaner with the s&s 58mm you have limited selection

her you go Hilly bit late sorry but the dyno guy ain't much of a computer guy Both sheets in std as I can't find the SAE sheets ...

  Akrapovic look interesting.   www.akrapovic.com/en/Motorcycle/products/Pages/ProductList.aspx

 After ditching the Arlen Ness piggy back tuner I got 4 fault codes, 1st 2 were the O2 sensors but I expected that after unpl ...

Thanks you pair I have it sorted, Had to go back to the updater and manually select HD06 FIRMWARE, then I found the icon and the r ...