G'day,for all you Motorcycle, Solo (Harley-Davidson Model WLA) riders out there, there is a copy of how to ride and maintain one a ...
How are you going with the 3D printer thing tussuck?I dismantled the same cruise control / throttle lock thing when I first bought ...
I had to replace the water pump on the wife's Tri-Glide (2019) late last year, we changed the sensor first but as temp light came ...
Old thread boosted as someone has recently asked for info.
https://hdforums.com.au/Thread/673587/1/ Here ya go
Well you wouldn't expect a 4by driver to stop after only hitting 1 would you? They'd only give the windscreen washers a go to clea ...
There 'might' be something in the non-harley tacho. So long as it works fine then no issue.Cleaning the TPS may/may not work ...
I want to call my lawyer
Just watched it.....second Aussie to do it and he aced it. Fabulous effort.
Octane booster is bad crap for the inside paint or lining as well I’ve that issue 1 set the white lining stuff done pre ...
.png?v=638718331914030000 "Screenshot (940).png")
.png?v=638718331931800000 "Screenshot (941).png")
Injectors are probably blocked if they sit for a few years They gum up with what fuel that was left in them than can’t ...
It looks like it was a load equaliser for the led indicators or low watts conversion. Somebody must have installed it for the old ...
Grandson is off on a Cubs camp as well at the moment. A bit wet yesterday but okay today, so fingers crossed they are having ...
Not as crazy a drop as you might think. 1.5in difference in height, split it for axle height and its .75in lower.
Hey riders, Thought I would share my thoughts on the Rinehart 2 into 1 which I have just fitted. So my 2016 Road King has se ...
plus they accept your old oil back at some stores
Yeah, all the time at the moment, my 3 month old headache being what it is.
Good info mate 👍
I had my slip on one in Townsville so yeah I didn't even give the oil temp being too cold a thought, but now I'm in Tassie it woul ...
There were two ex railway guys involved with Legend, Rob Wright who was an apprentice school instructor in the tool room, and Trev ...
