anyone know if 16x3 fatbob wheels are intechangeable with 16x3 fatboy wheels
This sure is a mechanical conundrum !!!! Personally ,, I would'nt want my 400 lb bike any where near a faulty lift or jack !!! ...
Go the "Shotguns". I think JD in the states does a good deal if you go direct and can handle the fitting job yourself. G ...
I haven't but it is straight forward enough if your familiar with changing cam bearings in your year engine.
Thanks Rob, yeh had similar set up in my 4wd
I'll see if I can find it thanks
My favorite Harley Solid mount Sportie XL1200S 97 to 03 I think - 36 and 40 degree lean angles, Ajustable Suspension for ...
So to wrap this up. I had been working long hours and only got to put the rebuilt solenoid back in yesterday. Well stuff me, is a ...
Anyone had any experience with Ultima roller rocker ?. Price is cheap enough just wondering on quality Cheers Phil
I'll have to agree with Krash. If you keep engine relatively stock, then just make sure the crank run-out is 0.003" or less & repl ...
I have removed the o2 censors completely off my fxst that runs a power commander v My mechanic had no probs tuning it with the la ...
Not normal, regulator is faulty, if it'e charging 17.25 to 18.5 volts at idle, what.s it letting through at higher revs ? ...
wonder if any one is using a V&H Pro Pipe and has the competition baffle in it and could take a picture and post it on here so ...
Yeh it was an extreme move but I figured it was time to upgrade. I pick the new bike up at the end of July and will let ya know ho ...
When setting up a AFR table is there any benefit smoothing the table eg 30kpa column 2500 revs 14.2, 3000 revs 13.6, 3500 rev ...
Thanks Guys I know what your saying Daggs and dont disagree at all; just cant get it done at this time. The little freeloaders a ...
Quite possible something is leaking inside the tank from when you changed the bits over. The output hose inside the tank has a gr ...
Try http://capital.hdspares.com.au/ Gives prices in aussie dollars
I normally use paint stripper and the pressure washer to remove clear coat.
ok cheers will do
