603/1690

Latest comments

simmac18
berliegh bars
Latest by simmac18 11 years ago

I had a set similar made with straight back risers in 13/4 drilled and tapped on top for a tacho didn't suit me they fit standard ...

Topic by: bignuts
9 1,103
beagle
Handlebars + Risers = Pullback?
Latest by beagle 11 years ago

You'll only pick up the angle of the rake with straight risers. Just hold a straight stick in line with the forks and you'll see ...

Topic by: System
4 1,987
FXST11
Fuel Lamp not working for Iron 883
Latest by FXST11 11 years ago

I also believe that the tell tale lights are LED, and if one blows then the whole block needs replacing.

Topic by: sri
2 918
sparkie001
Pipes & Carbies
Latest by sparkie001 11 years ago

Welcome

Topic by: Bodhi
6 907
Wimbo
Hirstys Radio show 7pm tonight
Latest by Wimbo 11 years ago

Signed that.

Topic by: GG-74
5 1,496
Ando
Highbury Pub (Lunch)
Latest by Ando 11 years ago

yes boys it was most enjoyable and was good to get a good turnout

highbury.JPG highbury2.JPG highbury3.JPG
Topic by: Ando
8 895
asshy59
Fuel Pack for 2009 fat Bob
Latest by asshy59 11 years ago

Gday buddy, I have a power cammander on mine and its done 162,000k I gained about 5 HP and better fuel economy with it and I haven ...

Topic by: Duck
6 2,233
Wimbo
Fatbob front Brakes
Latest by Wimbo 11 years ago

Either that or wheel bearings.

Topic by: Jethro
5 932
Dutchy Hoogen
Exhaust header has lost its nuts! - potential for damage?
Latest by Dutchy Hoogen 11 years ago

Dealers charge like wounded bulls, you would think they would have system in place to get it right.

IMG_5163.jpg manifold.JPG
Topic by: DarkAz
28 3,848
paulybronco
New MICHELIN Commander II - 40K on a rear tyre
Latest by paulybronco 11 years ago

That is great klm. Just replaced my street glide tyres again, got just short of 18k again from the std Dunlops. Shame there is no ...

Screen_Shot_2013-10-06_at_5.32.23_PM.png
Topic by: kmoulds
59 28,460
beagle
Twin Disc Front Forks on an 06/07/08 Softail Deuce?
Latest by beagle 11 years ago

Get the vin number and ask the dealer spare parts what it shows up as. Anything else is a guess.

Topic by: Black Deuce 07
3 1,215
jstcraig
Fuel tank for 883
Latest by jstcraig 11 years ago

Jst went and had a look at the Indian Larry tank on eBay again description says will take efi .I also have a on line Harley parts ...

image.jpg
Topic by: Shane883
4 1,334
Hallze
Getting close !!!!
Latest by Hallze 11 years ago

I'm sure it will mate!

Topic by: markwoumla
27 7,559
keith
First timer. W.A
Latest by keith 11 years ago

Welcome Rick,always a ride happening down your way, hope to see you out sometime.

image.jpg
Topic by: Rjay
6 861
oneball
Most Efficient Gear/Speed Ratio
Latest by oneball 11 years ago

Hi all...Gizmo,I do remember reading or being told that an engine runs most efficient at peak torque.

Topic by: Gizmo
4 836
robots
Cam upgrade for my TC 96
Latest by robots 11 years ago

Hi, got the SE254e cams installed, big thanks to Geoff3DMN for his review of these cams in his FLD and was fortunate to pick so ...

Topic by: hamerz84
31 10,166
McGee
RSD Gauge relocation kit
Latest by McGee 11 years ago

EDIT: Found the thread i was looking for.

Topic by: McGee
1 934
Lyle
2008 EFI
Latest by Lyle 11 years ago

Fitted with screaming eagle race tuner. 2008 Lowrider.

Topic by: Lyle
4 803
Blown66
103ci Cam SE204 & 57H feedback
Latest by Blown66 11 years ago

It's been a while but I did another fuel usage check & it has improved by 20.18%  16.01 Lt = 255 kms - 6.29 Lt per ...

image.jpg bikedyno1.jpg bikedyno2.jpg
Topic by: Ziffle
31 15,553
Gonads
Mastertune updates released
Latest by Gonads 11 years ago

Thanks Hilly.

Topic by: Steve Cole
3 1,031
603/1690