I'm starting to shop around for another bike and whichever route I go (Still deciding) I plan on doing doing some engine work ...
I thought the levy was to be dropped. You only had to pay the levy on one bike registered in your name, but they add the levy to e ...
Not sure if it's of any help but I bought some soft lowers for me Road King. They work a treat in regards to keeping rain off your ...
Good one GT!
Yes it is a funny noise but sounds cool. You will see that they seem to bed better than the std by the disc in a few klm.
Pmsl! Well at least thats something. Thanks pumped:-)
Thanks Guys I managed to get an original stock system for my 88' FXSTS from the States so problem fixed, thanks again for the help ...
G'day I have put a brembo(Harley) caliper and braided line on my 2002 heritage but keep the original master cylinder and singl ...
Nice work Ando. You sure know how to put a winning combination together. - Rob
i dunno why u would even worry about silly things like is it or not i took mine off over yr ago had dint and paint at dint or dent ...
Without a pic, its hard to tell exactly where its cracked. I'd say on the weld !!! Is it common, i dont know, but if ...
Hi there I have a 03 Fatboy and wanted to change the oil in the Primary / Engine / Tranny . I am used to hex head ...
AFAIK side mounts aren't legal though.
+1 about using a pressure washer to clean around bearings, Fk's them up.
good stuff will I would like to get a new bike but I only get $200 a fortnight, can't see a loan coming my way, the minister of ...
I have just purchased a servicar and originally the generator wasn't charging, ind the electronic regulator was burned out. ...
your the man daggs. thanks alot mate
he bought a counterfeit Rough Crafts A/C cant put it on lol.
I suspect it fits round the back of or replaces the front trim ring on the headlight. Take trim ring off the headlight and see wh ...
Hey all Finally completed some tests on my bike and found following results. i have 1.2 ohms resistance on all three wires fro ...