Latest comments

what state you in ..... maybe get them made ,,, get 19'and rethred and grind off the end i had a 19'fitted to my trident a long tt ...

Thanks for all the comments, rides as good as she looks, can't believe the chalk and cheese difference from the sporty.

The main bar is 1.25" but steps down to the standard 1" at the hand grips/controls. Handgrips to suit need to be 1" ID.

worked for me. but as it turns out it isn't my invention after I worked out what I wanted and how to do it I drew it up and went ...

Yes it does looks something like this $1000 fitted keep the old guard

120r is a race engine not meant for the road if you have a prang on it i garentee no insurance company will pay it out. If it has ...

Better than True Track

Berms ... my bobber bored to 103 high comp i  think 10 to 1 ported heads shimable head gasket 254e cam ajustable push r ...

I ran a set of brushed stainless 2-2 Supertrapps and gave up polishing them in the end (prefer to ride rather than polish). The h ...

I am just about to fit a set of SE 254e cams to my 2009 streetbob, does anyone know what the best down load for the pcv would be. ...

ive had 1 go on me thought i had missed a gear since then im carefull where i ride no shingle no burnouts and def no shingle ...

Anyone out there have a dyna wideglide basket case? Early 1980's to late 1990's. Sure would like one. Thanks, Alex........... ...

where's the best place to buy new tyres without been banged in the arse from what ive found like $500 f/r what a fucken rip off ta ...

ok cheers guys ill check them out

Yeah good mate, lovin it. Lookin forward to gettin out with the boys on a few big runs

I have just Put Progressive springs up front with a Screaming Eagle Forkbrace, Progressive 430's on rear. Rode to Gold Coast and ...

Mine are held in place with a grub screw - 5/64" allen key. Warm them with a heat gun in case loctite has been used, otherwise yo ...

Will do. Just need to sell the Guzzi now so I've got the last bit of funds for the fatbob.

You could be right there...By the time i got around to cutting off the "vent pips" (yes that's the technical term for them) I had ...

Anyone know of a larger tank for the WG? or anotehr model etc that will bolt right on?