Latest comments

ok cheers guys ill check them out

Yeah good mate, lovin it. Lookin forward to gettin out with the boys on a few big runs

I have just Put Progressive springs up front with a Screaming Eagle Forkbrace, Progressive 430's on rear. Rode to Gold Coast and ...

Mine are held in place with a grub screw - 5/64" allen key. Warm them with a heat gun in case loctite has been used, otherwise yo ...

Will do. Just need to sell the Guzzi now so I've got the last bit of funds for the fatbob.

You could be right there...By the time i got around to cutting off the "vent pips" (yes that's the technical term for them) I had ...

Anyone know of a larger tank for the WG? or anotehr model etc that will bolt right on? 

Jeezz....72 HP from a 96" engine, your kidding me! What happened to the good old 1HP per Inch rule!

good on you mate. now you are just going to be wondering if there is a little bit more to be had

I race mine regularly. Lowered front trough trees about inch and rear springs on lowest steting. I reckon you need it soft ishish ...

Awesome mate, I'll PM ya

Thanks justr brought a set of cycle shack slip ons and the K&N breather kit, i aslo purchased the O2 enricher harness. Anybody ...

Pat Cheers Down loaded and Printed out Blackie

Hey guys, been away on a run down to waroona so havent been on in a few days, haha it's all good, I know it doesn't look like it b ...

you could always just un bolt the bars from the risers and see how much movement you have to play with, check it on lock to lock a ...

 Hi, Yes the right will flash and the others will stay on,  vice versa when left flashing Its called biketronics tail ...

Yeah she is a heavy girl. Well, I havent got too much to compare it to but from the dirtbikes I've ridden it certainly is. But I'd ...

Just a quick one Ryno, you may have issues here in WA with larger apes. The boys in Blue really like to hammer us, but high apes s ...

Please add quotes in WORKSHOP GENERAL   Installed progressive 11-1525 fork springs in the 2010 FXDWG. Followed their instru ...

I machined up a cap out of stainless to cover mine, 3mm grub screw at the bottom to keep it in place