I don't have specific Harley experience, but I'm an electronics tech by trade. The very first thing I would be looking at is any ...
Petrol in a can with the filter in will clean it out. That's what I use. Let it soak for a while and then give it a blow out fro ...
Gday Noodle, it is not as easy as replaceing the plug. There should be no oil behind the plug Have a look at what i posted o ...
Did the mod on the throttle blade screw this morning, it surely was loose, but this didn't cure the IAC trouble.... Finally, it h ...
Hydraulic lifters. Treat it like a diesel. If it goes quiet, start to worry.
Have to agree with Burto above. Even tension with an allen key and don't do up the bolts that the threads squeal in pain. New qu ...
Just another thought biff, after noticing your location,,, not sure exactly how the breather is set up on your bike,, but ...
Rust is standard on everything if you live near the beach!! Burto.
TTS: www.mastertune.net/
Both pads are wearing.
Yep agreed they look great and stretching the legs would be a bit more comfortable for the taller riders. More specifically though ...
I use the 0.004" gap per inch of bore so 3 1/2" bore the gap would be 0.014', but i`ve never worked on anything newer than a ...
wonder if your missus would be laughing as hard if she saw you with her hair dryer stuck up in the guts of your bike ...
Help one and all, I have just purchased a 2007 Dyna Low Rider with 8500k. I have found that the fuel guage in the du ...
Come on Down, Im here Monday to Friday 8.30 to 5.30, Sat 8.30 to 1,,, 122 Cooper St Epping
Thanks for the replies. Pipes, gaskets and TTS ordered. Already purchased SE Heavy breather for clearance of my right le ...
thanks again for the info.. i can shift up and down succesfully by manualy moving the shift back to the returned position. otherw ...
Didnt have to go through compliance as personal import.
Might be best to check. If they are extended forwards you may just need to buy standard forwards or in turn you could you put some ...
Cheers steamer... I'm all good I am damned thankful for that. I was using the recording function of the tuner, so I could bett ...
