I would of hoped they replaced the handle-bars which is not expensive if the bars are the same
I have no idea. Not had any experience tuning M8s. Ring the dealer or drop in and talk to them. They should be able to download th ...
bugger....sorry for bum steer cob :-/
Looks good on the inside, not so good on the outside. This was an engine that the crankshaft had spread in L .016" R.016" runout b ...
As Hilly say what Comp you running . If 10. 5 a inlet closing at 46 deg . but then what is your springs PSI and max lift ? roller ...
Did anyone ever end up solving this? Can’t possibly be Snapon plug only. Only 2 pins left are a 12v brake light output on dlc and ...
I think he did my Tmax as well... bloody still going strong
Great, thank you very much! I'll try it that way too! Best wishes from Denmark ;)
Yes you can. I've done it. My speedo/tach was married to the bike for much longer than 50km, and I added the fuel leve ...
https://www.cartouchuppaint.com.au/harley-davidson/
Funny this topic about the PM 6 i fitted one to a customers bike and is not happy with it is used on a stock Fxst. i have Hawg Hal ...
Love it but it’s a pain in the area I live in. Too many hills. But love it.
Thanks for putting that link up Soap, I've had no luck with all the LED ones I've tried, Harley and aftermarket, think I'll go bac ...
Years ago I had a hotted up XJR1300. And I thought I was king of my little dung heap. A bloke on a Rocket 3 pulled up next to me a ...
Check clearance on rubber, shim mount, check exhaust not touching frame, check head studs Put rubber grips and foot pegs on if do ...
Sounds like a lifter to me, you might be able to pick which one with a stethoscope or a big screwdriver placed on the tappet guide ...
That’s an old post hanging in there, like self. Wat a lovely looking bike, I seem to only see Baggers on the road these days ...
Or just download things from harley https://serviceinfo.harley-davidson.com/sip/content/document/view?viewLatest=true&id=1681 ...
Hi, they go really well, very smooth, plenty of power and a pleasure to ride. I built the black one in 1980, the red one in 1985 a ...
House of Horsepower used the 4 screws for some insurance holding the cast in insert in place, the left case was the same. They ver ...
