I'm having the same problem with my 2003 Roadking classic, the factory alarm failed on my bike so I purchased a factory alarm ...
A guy rang me about my hard bags I have for sale, He wants to fit them to a 1983 FLHS Anyone know if they will fit.
pulsing air is normal and it will have a fine oil mist. the harder you work the motor (or if its buggered), the greater the ...
+1 there.....Check the cables and switch. If the cables are 100% then the switch may be on its way out and need replacing (should ...
You might want to get an Air fuel reading its sounds like it's lean
www.v-twinforum.com/forums/twin-cam-88-engine-technical-discussion/52635-clevis-pin-removal-rear-brake-pedal.html
they should be marked front rear???
thanks Walka it would be unpainted I presume, the main reason I was interested in the second hand one was because it is the same c ...
I think this is the go. Oil drains better when hot, but the clutch pack needs to be adjusted when cold. Reason - when clutch ...
Why are the cams you have only good for 2008 onwards? I have a 2007 flstf which I thought would have been the same. I was looking ...
Not sure what is involved - but guess what - I have a 2011 FXDC, single disc, and am looking at turning it into a dual disc. ...
Sorry rider, it's as you said under point 1 in your post. Tried it and it allows you to get a socket in there.
Just wondering if it is possible to remove engine and gearbox as one unit from an 02 wide glide thanks
They are ALL bloody critical! Do you thing the MoCo would waste money installing bolts that do nothing.
Ok then, Tell ya mate to buy a manual! lol (sorry oz, the banana devil made me do it)
You mentioned that you have changed the cams , l don't think doing that would effect the starter greatly , if you had put a big bo ...
Geeze Lizard, why would you go to the effort of choosing what you think is a nice / good system designed by professionals ...
I replaced the positive from the batter when I replaced the battery.... not checked the negative lead yet might just have ...
lol
got a 2000 wide glide and the spokes go rusty on the right hand side looking forward but the left side are still rust free put an ...
