Not really. There is a plug for the wiring on the rh side and a harness that runs to the lh grip for the heater wiring. Its not th ...
He was recommending them? Not complaining? Or did you not read it? :p
have you checked it for fault codes?
Ok the oil light has never can on ever. I bought a oil pressure gauge today and fitted it I went for a run up the highway and the ...
i was washing the bike today and noticed a crack in the paint on the oil tank where the dipstick / filler stem is welded to the ta ...
I ditched the OEM plate and made up one from polished Stainless. I also only drilled two holes in the stainless and only recabled ...
Thank you 103 - much appreciated ....................
Looks good. Glad it worked out for you.
Looking at doing it myself do you know exactly how much fork oil is needed?
A mate has done that, But he has just ran a "Y" piece to join both tubes, and a small filtered vent approx. 40mm in diameter just ...
thanks .my bike was the last of the tc 88
Hi, Nope its 100% OEM other than the fibre plates; hence why I am keen to repair rather than replace. (i awlways theorize that ...
From my experience bolting on a set of PM calipers matched to the original disc/rotor helps a bit. Fitting a larger dia disc/ro ...
Cheers FLHuTChU, a good laugh in an otherwise fucked up year.
SE 255's for more bottom end, and suspension upgrade to carry extra weight of Krispy Kreme survival pack installed instead of top ...
Slide chrome cover back down oil line, squeeze black tabs onto oil line then pull out. Take care when re installing as there ar ...
G'day, following on the advise given by KD and others I'm re-posting this from somethging I posted years ago. hope it h ...
Better pads help if you want the quick easy way and make a lot of people happier. Search function on the top right of the page&nbs ...
im wanting to replace my front blinkers but am looking for a basic drop in, don't want to go down the path of wiring up led lo ...
Absolutely, catalytic converter working against you, plus the heat!
