cheers guys. retro that looks like it uses the original mount holes. I thought it would mount at each end. Gives me something ...
I've done the same thing to my 2011 superlow but after doing a lot of home work had to change the top and bottom triple trees of a ...
So sorry to hear of your loss. Having lost a brother i know the pain it causes the family. Take care, and god bless.
Most definately try the string line. I measured up the axle to swingarm with a vernier and got it to 0.5 or less. but was still fu ...
with the back brake make sure wheel adj is central , loosen everything off spin the wheel put the brake on hard 1 to 2 ...
Thanks guys, im looking to spend between 15k/20k
Looks like you have it sorted out, but a sight Sponsor Eastern Big Twin is a top Harley Tunner & in Melb
hate wearing gloves. i have a pair of rjays tempest. really good actually and able to tuck your sleeve in and then tighten. sti ...
I'm going night dragons next time...just hope they hold up wear wise.
New flasher unit in and problem fixed. Thanks all for your help.
Hi guys, ive got an option a pretty cheap dakota digital speedo. Its the smallish entry level one, with speed and odometer ...
Mm cycles, great folk, cheap or reasonable post. Freat service.
I remember it took me about 2 hours of fiddle-fartin' around to get mine just right so the wind would go over the top of my 6ft2" ...
Everywhere at a buck eighty! that's some serious riding. Bike looks good. They do look more like 4" risers though.
thanks for that folks, i checked it out today and i think the oil must have been coming from the top of the fork. the rubber washe ...
yeah got ya with the fuel specialy me being on a sporty ,might only be going to miles then to wondoan for the first night st ...
Lookin at buying some gear from this mob,,, any 1 used them? they good/bad? (they seem cheap enough) Cheers I`m in ...
I wish I seen this post earlier I have been down the same path and used the ARB which didn't work I use 2 batteries and this syste ...
well talking at a club house up here , this seems to be a issue with about 3 bikes having this happen ! . will keep you posted
if they are the 1984 & later stock type hyd lifters with adjustable pushrods & set proper in the 1st place you ...
