Just an update on progress. Rode up to Perth just for a ride and to mention my concerns regarding cruise, since replacing throt ...
Ok thanks for your replies cheers.
Plane jane supertrapp it might be but that's the sort of decent exhaust that'd be required to try and replicate S&S ...
Bullet Race Eng & Ceramic Coatings located just south of Atwell when I lived in Perth. Great guy and mechanic
i sent you a pm message did you recieved it
Gotcha Hilly, I will give it a go this evening and try to pay attention to any clearances. Fikmik: the bike was originally tune ...
Bunnings sell bags of white rags they come in handy .
I just had some car wheels done and it cost $50 each to have them sand-blasted and the same to have them powder coated.
doesn't mean much is that your plug after a good long ride, a short cold ride, starting the bike cold stopping it pulling the plug ...
I have put the baffles back in and this has toned down the loud back fires and leaving the enricher out does seem to make a differ ...
Thanks lads. Look - The handling is not massive bad, but it's certainly not comfortable in the curves - and I am not hating it. ...
I've got the same shape on my Suzuki LC. They are a big bike Handle Bar that lowers the front end look of the bike and tightens it ...
any one used andrews 21n cams and are they a good cam for a stock tc88
if you have power @ da coil & there's no damage to the ign loom from da moudle in da cam cover , then just replace t ...
re-rooting is allways a good feeling
Thanks Mick good info and an interesting option. I got a 10 litre stainless steel pot from an old dairy years ago. I think its a t ...
I did not realise they had touch ups but I dont live close to any dealers either. Next time i'm in the big smoke I will have a ...
Yep that's correct, mine was built last month but it is a 2016 model
Mine did it from new, vented to air cured it
progressive fork springs will give the front a slight lift also, even more if you cut the spacers a little longer, the springs wil ...
