Looking for advice on how restrictive the stock header pipes are??? Should I go for just slip on mufflers or change out ...
Hello, Well I followed every ones advise and am pleased to say that it was 2 exposed wires, a purple and white one, plus an or ...
They say they can accomodate a 2.1 intake and are 0.050" deeper. I am unsure on whether to fit the compression releases. Also unsu ...
I posted the original question but since then have done a few mods to my bike,the main being a cam and at the moment it is running ...
Is the pipe from a Jap twin or a 4 cyl' ? Edit: didn't read your post properly ! If it's aftermarket, they usually ha ...
i have bigshot staggered look good but are very loud
Hey Spearking as others have said dont worry about blonde moments. I had a 2001 Heritage, one filler only on the right. When the ...
haha sweet as bakes i got the same prob with shit roads here and mr plod lol, i like my licence and yeah so i try stick to the spe ...
hey sprocket i had a similar problem on my 07 sporty, but only did it at like 40 ks not 110 it would run fine at speed or under ac ...
Might be a good spot to put the horn after relocating the coil to the horn postion and removing seat post for a cleaner look?
Thanks for that mate.
Thanks Guys
Well ive done it. Installed the forwards this arvo, and it went easier than i expected, plus they look like they are supposed to b ...
Break in period? Should read "ride it like you stole it"
No worries Surly i'm not into group two that much. Merry Christmas m8, hope you get that new comp bike you want Cheers
If snap connecter is fitted with o ring check it is not pinched or broken.
My tensioners were fine after 30k, and I just replaced them with new when I did Cams. The thing you should be worried about is t ...
Even without marking the previous adjustment, the cables are quite easy to adjust, as you said, put the new grip on then just ...
Thanks Dave, Based on your input I re-checked the Clymers Manual I have and have found the following info related to head studs ...
Thank you for the info, Steve... we'll use ETA009... @ Ozroder : many thanks and the same for you and your family, we'll drink ...
