sorry bike is A 1990 FLHTC
Thanx for the info ,I"l checkit out,much appreciated
good one thanks hound dog
the Screaming Eagle drag racing class is for any street reg'o harley on treaded tyres , no sissybar's ( wheelie ...
I agree I have a 6 row deluxe Jagg vertical mounted oil cooler on the frame down tube with a manual thermostat and it dropped t ...
Hi guys I'm getting ready to instal my slugs and found this on you tube for easy CP circlip installation. Its a very easy ...
Well..........the only plug I didn't check was the big grey one behind the battery. Must have knocked it when I put the seat back ...
why not get the harley plug and play one its only 330.00 an easy fit ?
just thought i would post this, bike had very erratic idle sometimes good most of the time bad grrrrrr,replaced idle a ...
If you have the race type super tuner you can adjust the throttle plate lag time with it.
Thanks for your help gentlemen, ended up using some whipper snipper line and was done in a few seconds!! Cheers Warren
aaaaaa finally found ya numbers on that donk issues lol yup is a strong and good engine i built this one a whiles ago an first of ...
thanks bezza that looks like the same size as the bits ive found yes had a few short shifts in my time ahhhh minister of finance i ...
Buy a cheap multi meter from dick smiths or Tandy for $15 and check all the earth wires. Red on battery positive and the black wir ...
Get rid of the 2" over legs, Stock length Legs will work fine with 3 Deg Trees
mate, iv,e got 05 dyna, 95cu barrels, 10.25 to 1 pistons, 211cams and a set of halam boyz heads, puts out 93hp at 100ft poun ...
yes , thats all i do is work on harleys 6 days a week & every now & then 1 a mth i take a day off & take 1 to the race ...
There you go
thanks 4 ya insight tuc
you either have to remove the shaft, (pull primary apart), cut the shaft off (from in behinfd the primary) or leave it there and s ...
.jpg?v=638937893478370000)
