Latest comments

  EVO sportys can do it  also shovels & EVBT , but the twin cam is good 

Looks heaps better than the Corbin seat with backrest too - The Corbin's ugly as hell !

hey Killerchef you could wack the speedo drive in a cordless drill and see if you can get the speedo to read. If you are just spin ...

And I will Buy it from you Zyban if you dont want it ....

 I guess if the counter bore on the flange is deep enough to accomodate 2 clips, then it would work ok. I can't really see t ...

Steve, did you alter your tune when you swapped the rockers out and then back in?

Anyone running a Thundermax with AutoTune and running one of those new  HD Combo Speedo/Tacho on a 2010 Fatboy Lo. I have ha ...

I had some Santee short shots and due to mid range and flat spot issues I posted on here some time back I decided to act on some o ...

Turns out wrong size pilot jet, wrong size main jet ,float set incorrectly and also air mixture screw turned out not far enough, s ...

sounds like a plan

stock belt

 Check out Wingy's photo in this previous thread......http://www.hdforums.com.au/Default.aspx?tabid=71&forumid=24&tpa ...

Thanks for all the help, turns out there are 3 of them near where I live.

  Not as yet - unfortunately I'm crook at the mo so haven't left the house to chase up the Lanotec or similar spray. The bi ...

I pulled three test runs and got 3 & 4 but the 3 was the straightest dotted line. I'm about to change to DPC 176 to try the timing ...

 I'll PM you, Cheers, Cris.

for -got  timing marks  for early  stock & S&S wheels are strike mark for full adv & dot for TDC,  ...

Where there is a will there is a way (or a relative) found a piece of 10mm steel bar the holes lined up with 2 of the bolt holes o ...

just  a heads up incase anybody else has the same or similar probem with their tail brake light as i have this might help! af ...

Thanks Beer Bandito, looked @ ordering from Sears but costs + freight from US ended up nearly 5 times the price of tool set. Just ...