All I know is , in 2002 i put a Hayden tentioner on my 2001 Dyna TC & it has done over 100,000k been drag raced from queenslan ...
Hi guys Have any of you tried this ? Im looking for any feedback. A mate in the US sent it to me for a pres
Hey mate, you can order the thunder max cables through Rollies speed shop. I believe it's a store stocked item. I ordered one w ...
Thanks for those bits of advice guys. I appreciate it. Cheers.
That's because thay are thicker 1.5inch vs 1 1/8 than 20mm on the 200 rear as for Oem is better as I've said before Harley don't ...
Cheers mate, I didnt think of that! I'll look into it
I used the s&s 107 kit in my last bike. I also wanted low-noise grunt. The 585 cam with the right comp gives plenty of torque from ...
*Slaps head* Yeah, that makes sense. But its not going to sit with the alarm on? I'm still unsure of how whole drop in voltag ...
He's collapsed over the keyboard with his finger on the enter key !
Fuck Yea Mongrel !! Nice
gday bonkerz. if your max running voltage is between 13.7 and 14.5 v then that will be good ,14v to 14.5v is a bit better as the ...
I have had a CTEK 2600 since 2005, used to leave attached to our caravan onboard battery. I now use on bike or car if/when needed. ...
Most people "measure" their tread by sight, which usually doesn't work. Unless you are measuring properly you "see" enough tread ...
That's the one same as shockproof strawberry
Make darn sure you run the correct gasket...There are two types that look identical except for an extra strip internal in one of t ...
I've been checking the bracket screws on both the heat shields since this issue appeared and they continue to come loose. I'm thin ...
A flush and bleed with new fluid seems to have sorted it out. Thanks for the tips everyone.
your right choppa it was stretched on order now mate
its putting the bike in what is called "transport" mode the manual tells you how but theres a lad on you tube that gives a straig ...
that sounds like the go Ninny Keep it local