The standard horn on the Street 500 is mounted on a right angle bracket, hanging out from the side of the bike. There is an ...
Great work glad it worked out and didn't cost too much time or money
Haha yep always busy as. Was there last night till 7pm with a mate getting his drag Harley sorted, never stops working. I was the ...
Why is this in the ECU forum?
Thats the right test! triple check that you have +12volts going to the module. Perhaps take a temp feed direct from the +12 term ...
No it won't chapo 07 up wider frame = wider swing arm anless u cut and shut
Hi does anyone know if a softail breakout swing arm would fit a 2001 softail at all cheers
I fitted Street Slammer bar (chrome) #55975-08A to my FXDB, needed 4" shorter clutch cable - standard wide glide #38787-06C. Thro ...
I have been given some almost new rear shocks from a 2015 Iron. Would it be viable to shorten the springs on these to use on my Ir ...
Frames are all the same, only the length of the fork tubes , fuel Tanks and Seats change on different models but it's all intercha ...
Thanks mate. Post some pics if you want. The problem is the fat-ass 240 rear tyre on the Breakout means most standard Softail fitt ...
I had a different pic of this pen in the original post that I got on eBay for just over $3 but seeing as the tip is rounded it doe ...
yeah fair enough, I didn't read the hyro-blasting bit, my bad... it was early... not really up with hydro-blasting, never ...
Krash it'll be an SE57 cam that'll be in but set up for a .600 lift. Any tips you may want to share would be great if you're an EV ...
yeah i brought a set of LEDs from HOGLIGHTS AUSTRALIA , plug`n play , 5 year warranty, a AUSSIE BIKER with a shop near brissy. CHE ...
Hi guys I have a daymaker 5 3/4 in my stock Breakout headlight housing Is it possible to fit the daymaker into a 5 3/4 bulle ...
Hey So i want to lower the rear of my 2016 Breakout, I dont really want to spend 2k on airbags as i dont care too much fo ...
30 min ride you should be fine....Just do not flog the engine. What tuner are you running?
just cut and move the mount on the frame or the swing arm
Surprised HD dont recommend the 3in1 for the forks as well Probably because a fork oil change is a bit beyond the HD kool aid d ...
