OopsDoesn't matterShould have checked the date on the original postand it doesn't look like he's been back
Thanks guys, so I need to check my flasher unit/replace ?to get a longer flash sequence,I would probably prefer one that doesn't c ...
Meanmother57 ws right. It was a corroded terminal inside the Deutsche connector. There was enough power getting through to registe ...
Got Progessive 444 shocks and fork springs on the way. Now, about that bloody stock seat...
All sorted thanks, I had to cut the standard one off and put pressure on the nut with a screwdriver while I undid the bolt, as I s ...
just wondering the coolant flow direction on the v-rods.sitting on the bike, does the hot coolant enter the radiator on the left s ...
If I could afford it I would consider it, but I do love the sound. It was either this for $500 then I could get cams aswell, or ju ...
Thanks I will have a look into them also very similar number
Thanks Perthhog, the bike is a 93 model, it appears it's the solenoid because after some tapping it started
double post...
I thought about it maybe leaning off too but if that was the case combustion temps would have gone up as well, which would have sh ...
I fitted a small toggle switch at the back of the headlight bucket.It really can't be seen.This is a bit ugly, but would work:http ...
Thanks. I did have it out a few months back so I'll try it. Only thing is that the steering is actually physically locked when I t ...
well bike is all legal and registered now absolutely stoked only took eight weeks from engineer inspection to reg
Hi looking at putting 6" pullback risers on my fatty 2010. Currently have the stock ones.. can I get the 6" to fit my 1.25 bars? A ...
Koas, your right, name callings childish, sorry for that. I'm just trying to get my bike running as best I can, was chasing advice ...
Yes bike is running okay but I'd like to know what stage cams it's running and hydraulic or solid lifters as I mentioned it's quit ...
Yep, got a Repco lift also. Missus works for them so got the employee deal. Had it 2 years and like all, they do drop over a short ...
Proper tyre lube gets the bead to seat well, windex or soapy water is crapI use furniture wax for putting tyre on and seat beadBut ...
Aluminum tig would do it but the whole thing needs to be aluminum. Have it all made out of 1.2 or 1.6 tin sheet then you can solde ...
