Latest comments

I snapped my final drive once on the old fxr.  I remove  dirt ang had it TIG welded back together.  Lasted years.

thanks again and it sounds like a VPC might be the go. I don't intend on drag racing but I also don't want to be losing power beca ...

Sparky has called around to my shed, he removed the fuel pump soldered wires and bogged this stuff around it and good to go " he r ...

OopsDoesn't matterShould have checked the date on the original postand it doesn't look like he's been back

Thanks guys, so I need to check my flasher unit/replace ?to get a longer flash sequence,I would probably prefer one that doesn't c ...

Meanmother57 ws right. It was a corroded terminal inside the Deutsche connector. There was enough power getting through to registe ...

Got Progessive 444 shocks and fork springs on the way. Now, about that bloody stock seat...

All sorted thanks, I had to cut the standard one off and put pressure on the nut with a screwdriver while I undid the bolt, as I s ...

just wondering the coolant flow direction on the v-rods.sitting on the bike, does the hot coolant enter the radiator on the left s ...

If I could afford it I would consider it, but I do love the sound. It was either this for $500 then I could get cams aswell, or ju ...

Thanks I will have a look into them also very similar number 

Thanks Perthhog, the bike is a 93 model, it appears it's the solenoid because after some tapping it started

double post...

I thought about it maybe leaning off too but if that was the case combustion temps would have gone up as well, which would have sh ...

I fitted a small toggle switch at the back of the headlight bucket.It really can't be seen.This is a bit ugly, but would work:http ...

Thanks. I did have it out a few months back so I'll try it. Only thing is that the steering is actually physically locked when I t ...

well bike is all legal and registered now absolutely stoked only took eight weeks from engineer inspection to reg

Hi looking at putting 6" pullback risers on my fatty 2010. Currently have the stock ones.. can I get the 6" to fit my 1.25 bars? A ...

Koas, your right, name callings childish, sorry for that. I'm just trying to get my bike running as best I can, was chasing advice ...

Yes bike is running okay but I'd like to know what stage cams it's running and hydraulic or solid lifters as I mentioned it's quit ...