Thanks guys, will consult the catalogue while wiping my largish forehead and checking the phone
Cheers Doc!
I regularly use these guys new screens, cuts etc http://www.handcraftfibreglass.com.au/ Open on Sat mornings and normal ...
i have had 120+ hp out of da 110 a few time's with using da same piston's
Doc the 255's will work well. No need to change heads or springs or anythingThey drop the max revs compared to other cams like 204 ...
My Apologies Hilly/Hoodeng When I replied to this post...it was the first one I'd Read....bad me for not scrolling through...or b ...
For my bikes, if it comes off it goes back on with Loctite. Its that simple.
Thanks Arron, exactly what I needed to know!Just the same procedure as the XV-250, easy & simple.
Maybe go have a coffee (or stronger) and sit down at a location where bikes ride through. This is how I came across these 2 guys. ...
You can't rush these things, it's best to be sure.
He did say grind it down but unless the mount moves in the gap it is acting like a spacer, the moment it starts tightening up in t ...
Have to work down the line, if the bike sits between weekends move on to injectors. My not be atomizing the fuel made worse with e ...
connector, I'm hopeless without a manual, which I read after damage done, like Ikea directions..anyway how did we get to beer. Now ...
Thanks again KC, you are spot on with your info.Problem corrected in two seconds flat.
They may have expired!
Any one used a machine shop here on the coast you can trust to do some work?
Small O_Ring inside the female sie of the connector body 14/10/2mm. Available at any engineering supply shop. Tricky to chan ...
Hutchy. If the oil gets low, is the top of the bike white or clear.
I have no baffles in mine straight off the header style.. still doesn't stop dickheads cutting you off..
