PS The dealer also removed the oxy sensers and pluged them and put a self tapper in the exhaust flapper....... after reading what ...
kuddos to that joe when I was ridding gixxers on the road Id be lucky to get 1,700 k out of a back tyre, and when I raced I d ...
I spoke to Huntingdale a couple of years ago and he was charging $650.00 per Wheel
Pete, I had the guides on my 77 IH done at Northside Cylinder heads at Northgate. ..had the seats for unleaded done while it ...
that was a good thread.
I made this up to assist with wiring my 77 sporty . . .not finished yet . .so i can't report success or failure. Use it if y ...
Brianstrap Thanks man, Is a good heads up so we don't make the same mistake. Only thing I am woried about that the spare goes fla ...
Check this out, may be helpful http://www.ntc.gov.au/filemedia/Reports/NatStatExhaustNoiseTestSept2006.pdf
Hello to all I have a 2007 FLSTSC it came with a 150mm rear tyre from factory, i would like to increase this to 200-2 ...
Here is all the info I have compiled on the ignition switch relocation for a dyna. I did this relocation on my streetbo ...
Any mechanic will always go up 1 jet size as a matter of course as this is how they are trained.........................some engin ...
The last thing you say in the Flat Battery thread is that you plugged in the standard ECM and everything was ok, so if that happen ...
Why buy a bike that handles and then put old-man boards on it!?
And take some pics...
Last week took time from a Murray ride from the Hume weir to call into Adelaide to see "THE GURU" Scotty, who most definately live ...
I've got an 07 Fatbob. The only thing I didn't like about it was the exhaust system... I don't like the rear cylinder pipe runni ...
the dunlops r having a delaminating problem at the moment, it begins as a small line across the tyre then gradually gets deeper. a ...
yeah mine stays on aswell.
Another question time to replace the mufflers on my Ultra what is the best out there that look good and sound ok thinking of a 2 i ...
And maybe you should throw this in the WORKSHOP GENERAL area !!!!!!
