just put the oil in and air this morning mate have to set it all up will let ya know when i finish thanks again.
dont quote me bud ..but if it aint factory it wont pass?! any takers on this idea ?! unless you know someone special
You should pay nothing Burra, below the limit that they will lift ya skirt and have a look. They can if they really want to (being ...
Just a heads up for anyone interested, i have no affiliation, just a customer. Kathy, # is 0447845045 20/50 MCV oil is currently ...
the gen 3 fuelshot bigjoechoppers
Whos played around with gaps? i found when i pulled the sp out they were 0.055inches, i reduced the gap to be with ...
I use Inox with a cable oiler that I got from a bike shop. Screw it on to the cable then connect the inox into it & the liquied is ...
hi, you don't mension what cam your using , but with any mod when you change the deck height you must check 1st + it d ...
Thanks for the info Skulz.... Thanks Hogbag, will get it checked asap.
Hey guys, Took bike into work today whipped primary cover off fitted lock up tool then checked for tension on compensator bolt. ...
Cheers mate, i think i found the missing link. The volume of the piston reliefs (i think) , i based my calculations on -3.0c ...
Cut pasted and saved thanks kiwidave.
Looking at replacing the stock valves with Manley valves, but just wondering while the heads are apart should I just replace the w ...
hi, 1979 was the last of the cable driven tacko, 1980 up sporties are all electric
hi, i think pushrod to rocker spacing could be differ also frame & carb clearance , i know early ...
Kevin from Frasers ( ) gave me a contact that does this type of work, but never got around to contacting him... not sure where the ...
Not sure how to email you directly braando, hope this does not get me all the spam in the world but you can call me on my mob also ...
Posted By PigironBob on 23 Jan 2010 1:09 PM Hey Berms, you better get at least 3 cartons for Stix, or maybe 4 even, he's 1 cart ...
Thanks guys.
I have poste this on the Sportster section. Basically I have lost one of the baffles out of my Screamin Eagle mufflers, they are ...
