Job done took the batwing off gained access to the top of the forks that way but when you do the job you will need a 1 3/8 th ring ...
Yep agreed I will get the dyno done after Xmas and keep you all posted then👍🏼
When the bike is your only transport you got to get inventive, I used to wrap the 12 gauge in a blanket and tie it across the pill ...
Thanks mate. I will give that a go.
You're only human 😁
Put the new fully charged battery in, on start up it doesn't drop below 10 volts, no hesitation, calling it sorted.
A while back I wanted to cover that crappy brace between the down tubes on the front of the frame of my Road King.Couldnt find any ...
G'day Wayne, welcome to the forum, if you punch the part number into eBay and the like you might luck out on an original, aftermar ...
For sure the twin cams run hot, all I'm saying is with a better state of tune that can be alleviated to a large degree.Carby bikes ...
Fuck me I read some of those posts. those yanks are some seriously f'd up pencil heads. Essentually they make ra ...
pfffft.....NSW need it - by hook or by crook!
Hi all whos got the best fork covers out there just bought a set of dominator handle bars so funds are running out cheers
Hi bukkers there's probably not many on this site with a '23 RoadKing but have you enquired with custom dynamics themselves or eve ...
sooooo fkg slow home now im thinking of mounting a 12v fan off me apes to at least feel like im still in the wind :-/
A couple of old pics for comparison FC.The press ride for the release of the Switchback went through Obi, and pulled in for a phot ...
Pan Am out and about today....all fixed
Man! I'm right here!
Tie a fucken alarm clock to the box before you throw it, more effect
Easily rebuildable too when the time comes, an oil seal and a couple of O rings.
I guess new parts fail sometimes. Now get him on a few outback trips, and tell us how it survives 👍
