Thanks for the reply mate but as suspected one side fried .Under warranty so new one coming
I roll them in with a 1 7/16"AF 3/4" drive socket, you can use a short extension if you want a handle.Cheers.
Follow the linkhttps://www.youtube.com/watch?v=m3ccpoXrsJo
Correct tools are a must.I cracked the cast rear engine/swingarm mount on the gearbox of my dyna trying to get that nut off.If the ...
hand pump vacuum bleeder works well plenty of kits on ebay about 25 dollars delivered , have used and work well . just seal the bl ...
Any time I’ve enquires about getting ‘bolt in’ cams I get hit with ‘oh you need to replace the pushrods too oh you have that tuner ...
Cheers mateThe funny thing is, I thought I ordered the chrome tips, but now they are on the bike, I dig the black
Thanks TussuckI kinda figured there was no easy way, better fill the shed fridge and get into it.....
haha
Bloodogs tip for the day Make your hamburgers, spaghetti sauce, same as normal but use this roo meat I'm telling you is ...
Thats good news!!
thanks mm 57.I was interested in this trial, out of curiosity, we do that still.R O K ? OR..
Hi,Rebuilding my Ikons on the Sporty.Does anyone know if a normal car suspension place etc would be able to remove the Pin nut fro ...
Hi, I am after an original factory speedo drive for my 99 FLHT. I have tried the cheap Chinese knockoffs. Last one lasted 10Ks. I ...
That was part of my point a good tuner could tune a carbie at set points with more acceptable afr s With the use ...
If your AC is the Screamin' Eagle stage 1 then this link for the instructions sheet will have a break down of the parts you need.h ...
Did you need to space the belt and pulleys? And what fender will you be putting on?
I know what you're trying to say and I think we agree but differently, lower speed exhaust efficiency (maybe smaller with more air ...
The reason(s) the dealarships don't purge the oil are simple.1) no money to be made in it for them where time=money. If they ...
Look for other bikes of similar vintage to yours and with the same size forks (mid glide / wide glide). Shouldn't be too hard to f ...
