Well it's a good time to buy, and there's a lot of cheap evos out there, I went looking in the usual spots and was surprised at ho ...
All good Hilly . I fit what customers want . I warn about you get what you pay thing. I have fitted Fox I have fitted slime china ...
I fixed my 23. Bought a dongle from Tim’s Stereo Systems in WI (USA) It plugs into the P&A port under the seat. CarPlay ...
Thanks for putting that link up Soap, I've had no luck with all the LED ones I've tried, Harley and aftermarket, think I'll go bac ...
.jpg?v=638150841822430000 "PXL_20230322_103238882 (1).jpg")
Hey Beagle, It is a really crap time to be selling. I ended up getting $8,500 for the bike and the parts. A bit less than I ...
The barrels measure 32 thou over, so I say at some time it was taken out to 30 over and then 2 thou wear. The pistons, though, wer ...
Hi all Does anyone know where to buy one of these in Australia. I know they are sold on Amazon but cannot find if they are co ...
Give Terry Hay a call at Shock Treatment in Greendale NSW. He’ll be able to rebuild them. 02 4773 9115
I do Tom, I have put a lot of hours into both doing it and working out how to do it on the road, too much to type in here with 1 f ...
the old WD40 it's good stuff- check out number #26 on this list- https://www.wd40.com/useArticle/unusual-uses-wd40/
Years ago I had a hotted up XJR1300. And I thought I was king of my little dung heap. A bloke on a Rocket 3 pulled up next to me a ...
Just mucking around up Muddy Creek rd, Dunno if the house is being lived in, lot of tyre tracks through the gate but there wa ...
Thanks for watching mate. Can't wait for our next trip. Wish we could have just kept riding.
I highly recommend this stuff it works well, spray on let it soak then simply hose off- https://motomuckproducts.com.au/products/a ...
Check clearance on rubber, shim mount, check exhaust not touching frame, check head studs Put rubber grips and foot pegs on if do ...
Did I say that out loud…. Haha.
Reminds me of the saying " “I cried because I had no shoes until I met a man who had no feet.”
yes not his 1st crash
Sounds like a lifter to me, you might be able to pick which one with a stethoscope or a big screwdriver placed on the tappet guide ...
It’s excessive end-float in the rockers. They tap on the alloy head casting. If you don’t get it early, the rocker end dents the a ...
