You will be shocked by the grey filth that comes out ! If you want to be really thorough, you should also dismantle the forks and ...
You can pull a rim straight if its not too bad with the spokes if you know what your doing. I got sick of the rust and drama ...
Cheers mate, having a hard look at them all...no real idea what I'm doing.
I like it. It would be very cool to test drive one. It could be a game changer.
I always thought it was tighten it up until it feels like it's stripping and then back off quarter of a turn. Keep an eye o ...
I'm thinking it might be more wise to bolt it down to something like a large slab of timber, such as an old timber door for exampl ...
Hi OT Thanks for more feed back, good to have as much real info as posable. I'm in no great hurry, this is a project bike, ...
How loud are those pipes???? Sorry,no help with battery issues...
Check the tyre diameters. From what I found the 16 to 19 inch Harley wheels have the same rolling diameter, so a 19 can be swapped ...
Yeah that's interesting, no didnt baby it just rode it nomally as from the day I picked it up brand new. I also heard they run ...
Hey neale , take it to sydney dragway one wednesday night, see what trap speed is, thats the best dyno no question. the TQ look ...
Mind you though that brake looks tough.
If you have one most key cutting joints can make a copy, they read the info and copy it to the new one. Generally casts $100-150 b ...
I'm in hydraulics and generally gauges have a 5-8 % error factor, you can get 2% but your talking big bucks. As stated the procedu ...
Thanks fellas.
have a look at page 8 of the softail section under speedo dash/cluster ? I gave a few tips to some one else few mths back ,maybe a ...
nah, its the right bearing, looks like im pulling it down
Yes it is a funny noise but sounds cool. You will see that they seem to bed better than the std by the disc in a few klm.
Pmsl! Well at least thats something. Thanks pumped:-)
G'day I have put a brembo(Harley) caliper and braided line on my 2002 heritage but keep the original master cylinder and singl ...
