Hi everyone, Cannot engage 1st gear, will select 2nd and up and come back to neutral. &nb ...
What a cool idea! Looks easy enough to make. Might be time for another winter project.
These issues can be hard to find... BUT... with some process of elimination you can normally find it. SO.... let's go through t ...
Got this one outta Melbourne, was a bit too green so put a black tank on it. Recon theres a few of em up here in Darwin. ...
Ask Brenton at Level 1 Cycle Spares, 187 Main North Road, Nailsworth, (Ph: 8269 1082) He will be able to help you out w ...
Welcome mate.
Yeah I'll be on it as quick as I can. It's my only rolling vehicle ATM. Been away on it though so haven't had time to hoist ...
Oh and I'd have a look back over the previous pages and really try to figure out y ppl have taken your comments as insulting to bo ...
Checked the front brake lever and the brake light was staying on. I'll bleed them tomoz. Cheers !!!!
I have been running an 18x5.5" with stainless spokes and a 200 tyre for about 7 years, no problems to report, I am one that stil ...
Pulled an off-road caravan thru there a couple of years ago. Only a short run a mind plenty of fuel stops. Driving thru there I dr ...
I'm from the area mate, but unfortunately have a new bike under warranty and need to service at gossie...but, these things are bas ...
Sorry for the delay in answering back guys. Found a plug to suit. it is a DEUTSCH DT SERIES 6 WAY CONNECTOR, and fits under ...
Fair enough, I'm south east Melbourne so I won't be going there anyway, happy with my local dealer so far, I'll be doi ...
Probably not the right area to ask this question Rigid, maybe try the workshop. Cheers, Roo.
JFE, both roads were perfect, one short section on the Gillies Range Rd that had been resurfaced recently so was a bit slippery, b ...
Cheers for that I've rubbed powder coat off steering head I'll check the front mount next thanks your help much appreciate ...
yeah, pretty much wait for the green. Drivers here expect it so you will not get honked at for doing a legit hook turn. Its ...
oh ok that maybe the misunderstanding.... as with any driving lights usually fitted to the high beam, they must turn off ...
Mine did the return spring inside the box. Gear lever remained in first gear , had to be towed to dealer. They knew what it was be ...
