Good idea to do the mockup, might try that before I order the kit, thanks mate.
The manifold needs to be in its happy place with the seals at the intake opening in the heads. That is the most important thing. ...
I have glanced at the fit, this one is much tighter than the old, still clearance, the old one flops around, so much so that the s ...
The difference apart from the actual lifters in the various bikes is valve weight, lobe profiles and over the nose spring pressure ...
Is it still doing it after being switched on and off?On the bigger bikes you turn the hazards on by holding both indicator switche ...
Probably not a bad starting point . That's an old JMC swingarm, long out of business . That does look like an aftermarket frame t ...
It never seems to render forks detail well, and often renders the fuel tank with a roller welded seam around tank base or tunnel e ...
That's what you would think but it is still within spec and it looks straight when I check it with a straight edge.It has Minumum ...
Nothing wrong with that lol 👍
Each to their own,which is good,would be a boring place if we all liked the same stuff.
You'll get to that point fellas, it just seems to take forever.
They look a lot like the latest Nightster to me. Won't have the 90hp kick in the arse though.
ohhhh noice - into the hole I go !
Don't know where you are located but I took mine (I had to pull the unit out of the bike, not hard) to a repair place (but it was ...
We have a member on here that is real handy with paint, hopefully he sees this
looks like around 30% parts 70% labour cost. Try a few independent shops . Namz wiring kits do make the job a little easier these ...
Sorry about that.. been pretty inactive on this site until recently ;)
Nooooooo, I shall live my XL1200S dreams thru you at present ! That and "I wish " , I have been foolishly watching you ...
Thanks Hilly will try that. cheers
It's the same News spin that has been floating around. I really can't see Indian going away for quite a while, if at all. The priv ...
