Latest comments

Thanks AJ, I'll take the clean the crap option first and see if that fixes it.

what about us in the west is rac doing it over here any one heared

Put a system on that won't scrape ? Maybe?

I know Im not the sharpest tool in the shed, but how can it be comfortable to ride with the seat moving up & down with the wheel? ...

using a laptop and interface setup to the bike.

burleighs are about the best, anythings better than the stock bars, got mine off fleabay, check the Burleigh website for prices

I have a 2005 fatboy and have gone the s&s gear drive setup with easy start cams. checked  my crank runout at .0015". got ...

This is the stock buddy seat fitted to a 70FLH the same seat was offered on 69 models, you can see the pogo and the helper sprin ...

if you mean the nut a 38mm or 1-1/2" AF socket will do the trick

Thanks for the offer Burto but your 96 puller is for a bearing with a 1" id. The 95 has a 7/8" id. Iam back at work and I think th ...

 Dev1, looks like that lean spot was between 2500 and 4000rpm, and maybe a little at 4500-5500rpm...........if so,he seems to ...

 If ya turn em gay Robbo........the back of your head is what they'll be lookin at anyway!!!!! Burto.

Much appreciated Cris I will let ya know how I go. I have actually got the service manual but they tend to leave out the bas ...

 Haven't installed them yet need cam bearing removal tool. Will post when finished.

Rollies in queensland emailed me the other day with a hot up S&S kits year 99 up for 88" and 96" twin cam to 124" using origina ...

You might consider using some EVA or PE foam( around 45kg density) as the base with a high density urethane( around 70kg-90kg) on ...

Last month riding from Ceduna to Nullabor Roadhouse (312k) got in on the smell of. Put 19.5 litres in and the book says tank on He ...

I saw a bike with a set on yesterday and really like them, and even though they are very nice pipes, I did notice one thing which ...

Thanks Burraburra,once i got past that little holdup all went good, although It was to fidely to get at the end  of the wire ...

 Black should be the earth,  current flow with both high and low beam. Dry joints/loose connections can come and go for ...