Mate on another note, you fitted the Se Comp to your bike? Did it make a difference when starting? When I start when cold no pr ...
Thanks Hilly.
Not sure of the code but it seems EFI have the same issue. Try cleaning the IAC with carb cleaner whilst operating the Kill switc ...
Thanks for the info. Loaded up the M15-004-078 map yesterday with you 10-12 suggestions, did a 350km ride yesterday out west, ...
A mate of mine has a Fat Boy Low that is throwing an error code PO108. The info that i have (which is for a 2006 Softail Standard) ...
cheers Chicken fot the info.
Just got a price from Pat at HH for Progressive 440's for my 2010 Super Glide Custom $1050. Got a price from my regular supplier ...
I guess you've tried richening the Idle mixture screw ? You could try 1 richer on the Pilot. I find it all guess work, unless you ...
I have used number 1 and was happy with the out come.
I'm wondering that if the brake pads were contaminated with oil or grease they might cause shuddering? Maybe even c ...
Hey Dicko I put the multimeter on some bits of wire and looked at what the mm said..... as that made no sense I started hammering ...
How mutch belt deflection do you have could be way to tight and do you dump the clutch often.
Finally got around to adding a SE Super Tuner to the Fat Boy. The exhaust pop is nearly gone, and definitely an improvement. Added ...
Hi Sheree, Just fitted a high flow air cleaner to me 48 which is a little different but not really. What I did was use a SE stag ...
Thanks guys Sounds like a good thing. Will do it
G'day Finny. As Dave requested, give us as much info as you can think of. It's hard to diagnose stuff from afar, but the good th ...
I have an '08 Road King Classic which I bought recently with only 5K on the clock. That's not really relevant to my post however. ...
Will do Milo. I'm leaning towards the chrome covers at this stage but I'm not keen on them falling off as previously posted. A bit ...
Contact Paul hallam , google hallam boyz, he just did my 05 dyna heads up fuckin thing screams, he will see you right,Cheers ...
Hi, is there anyone out there who can give me any feedback on vulcanworks in the states.I am thinking of putting a midglide ...
.jpg?v=638937893478370000)
