There is a spring works in Osborne Park. I have used them to make specific springs for me before, not for the bike but a spe ...
ALLS GOOD, bad rattle was only the cam roller bearings shitting themselves in the front cylinder. bearings disintegrat ...
I prefer the look of the Roland sands kit myself
Hi Guys Just a quick update . I took the bike back down to the Burdakin last week and we had a play with the timming this time a ...
Will let you know Chimney, bike should be back in the next few days..............will be coating it with the ACF-50 and hopefully ...
Up the compression, work the heads and match the cam, your head guy will specify a cam, supertrapp exhaust, rejet the carb and hol ...
Had the Vance and Hines big radius system fitted today The bike shop had to fabricate a mounting bracket and did an awesome job ...
I just had a stock set bored out to suit 98"/107" (3.938") with no problems at all. They have been doing this for some time in th ...
Got a set of DNA forwards off a mate for my 89 Heritage, could not get any pressure at all. Tried every way of bleeding known to m ...
thanks boys
Those intakes look real nice Walka................... +1
Got the bike back from the dealers today after they fitted the metalarts compact magnum air horn, handlebars and auxillary lights. ...
mine kept blowing headlight fuses ,and after pulling all the lights apart and checking for bad earths or shorts i still coul ...
Feed a length of nylon rope into the front spark plug hole and then turn the engine over (via turning the back wheel in top ...
its all good iwill look into cams a little more then work out what I need no stress its all about learning
Hi there Hwg, The instructions do say to hold the reset switch in and then turn to ignition and it will take you to the set ...
The only place you might feel that dip is in 5th 6th gear but that would be lugging the motor. If I had the money I would be buyin ...
Thanks so much for that great info....I'm in Wollongong. Can you steer me in the right direction for an Enginners report?. Mine is ...
thinking about putting a paughco springer front end on my 02 wide glide , i am not sure of the steering neck size , any advice wou ...
Where are you locateded Dave ? If your on the NSW central coast give me a ring and ill help all I can... Bucket that 81 bike is ...
