Thanks everyone for the info. It's the space between the spacer and the fork on the right side (non rotor) side that I am worri ...
I set them at 100 down and they where noisy so I then went 150 down with better results. I might give one turn of the bottom a go ...
Ok, on a more serious note, the turn signal indicators (dash lights) gets their signal from the speedo, which in turn receives it ...
Dunno bout the sprinkler heads on the SG's. I think they will wait and see how the current released ones go for a while, you know, ...
Thanks tussuck i always though Pirelli was a really soft compound tyre, well they were on my old busa i never got more than2500klm ...
on mine it was the disc spacing so I had to shim the capiler. take a tape down to the Harley shop and measure a few bikes to see ...
We have a service manual read and did everything it told us. We have spark, we have fuel and there is no air leaks. in the ...
Welcome .
I'll make sure the Oasis is on the agenda next year. I'm connected with ACR so info is easy to come by. We went into Loxton on Sat ...
cool
Agree with Scotti. I've been buying my gear from HH for couple years. Always get about 20% discount off list plus they ship to my ...
I caught up with an uncle who is in town from the east over the weekend. He seems to recall it as a Rudge. Thanks for the info ...
So what work did you do to the bike just prior to the problem starting up?
Here is what you want!.... http://www.ebay.com.au/itm/181232866966?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Cheers ...
Mate well done on the conversion, gotta love a guy who ain't afraid to do something themselves that is a bit left field
Always wondered why the rear is in the centre but the front one is off centre ? I just use a small 90 degree inflator airline fit ...
Thanks for the feedback ,paulc hellam built the heads , and i had it dyno,ed with the 211,s but not the 585,s as the only dyno sho ...
http://www.hdforums.com.au/Default.aspx?tabid=71&forumid=15&postid=472358&view=topic Have a read of this thread. I st ...
I know there's been some issus with site performance over the last few weeks. I've been trying different things to fix it.&# ...
Yep, I've had one of these for a couple of years and its a great bit of gear. A rotary is heaps quicker of course but if you don't ...
