ive got cv with stage 1 dynojet kit with 180 jet with the clip on slot 4 but no cams so if i was you i would go the 190 160 ...
Thanks all. I'll make sure he only drains it from the oil tank, check return oil and if it looks good, I'll try a new switch. G' ...
+ 1 I'm going through that issue at the moment, 3/4 bearings are much wider than the 25mm and its causing me all sorts of problems ...
So after the sale of my wideglide set up falling through, I got the shits and mounted the front end etc yesterday. All went ...
no, don,t do it
Got hold of a new relay the black one. replaced and away she goes again. Thanks for your help guys. I spoke to a dealer today abou ...
Thanks guys Will change batteries and see what happens
Strange how just one stays on! Un less ne still has the wrong globe! Also check the wiring under the rear funder to make sure th ...
It's a Widey,,,, so better still loose the rear footpegs !
G'Day Confederate18, Pursuant to what Dave said, Timing by ear is a little trick I picked up from a Yank mag many moons ago (aro ...
IRON there's a link somewhere around here for a free manual PDF download for 2010 sportsters. About 150mb. Slap.
Does anyone know who does trike conversions for Sportsters in N.S.W???
They`re designed for the average joe , they are meant to give the rider that upright to slightly forward neutral sorta rider posit ...
Put a blower on the 120r and hold on for 200+hp....lol
i got replacing the brake rotors and pad and noticed the rear caliper has alot of movement i snapped a video is it meant to be lik ...
If I use my sert /tts interface cable into my se pro super tuner and an A type usb cable will this work? the hd numb ...
Hi Hogbag, mate did your friends PC3 work again after it had dried out or was it cactus ?
Cheers Timmy, will keep it in mind.
Part# C9721 www.denniskirk.com/multi-layer-steel-mls-030-in-head-gaskets-for-95-in-103-in-twin-cam-c9721.p264363.prd I've got a ...
Just a quick update, after spraying the rear brake caliper with brake degreaser and cleaning the bike, I don't seem to hear ...
