I have a 2011 FXDC, I was riding home and the engine light came on and then stopped. Now it will turn over but wont start. I have got the codes

P0261 front injector open/low efi

P2063 rear injector open/low efi

P1003 system relay contacts open efi

U1016 loss of ecm serial data

Can anyone help with what the fix is for these.

Thanks

jimmy

P1003 is system relay contacts open.
Pull fuse cover and replace relay closest to fuses with a known good unit. Try to start. Maybe grab one off a mates bike to try
One question, does the fuel pump prime when you push the run button.

Hi carbon fibre,

I couldn't ear the fuel pump priming, which i thought was strange. I might have to find some one with bike a can steal a relay off to try.

Should be able to get a matching relay from any auto store. Take it with ya and try n match if needed.

Relays are about $10 so no big investment.

First, pull the large fuse, big bugger about 30mm across green from memory. That will clear the 'ser bus'error. Now make a note of the codes and clear them as described many times here.
See how that goes. Mine is an 04 carby, but it throws a few codes, particulaly when it backfires and stalls due to open pipes. It also doesnt like a quick stab at the starter button either, but thats a different code. This may just get you going again . Recheck for new code after a short run.

Got hold of a new relay the black one. replaced and away she goes again. Thanks for your help guys. I spoke to a dealer today about the other code for the ecm and was told that this would come up if the bike is turning over and wont start.
I am glad it was only a easy fix.

Thanks again