Added some 3mm plate to the sides so the bar itself is 30mm back and 40mm higher and welded it. Not very showy but does the job.&n ...
i don't think it matters. i have mine marked for left and right so i've never mixed them up - but i'm pretty sure it's just down t ...
Hi mate I sent you a post on your other thread as I have one
Where are you located?I have mustang solo seat, backrest and separate pillion seat that have barely been used. Id pm you but ...
up for sale 2014 883 super low ex cond 10500km SHORT SHO ...
you can still get wheels relaced here in australia. just use your hub buy rim & spokes. not hard to do yourself. but need a fe ...
Items as described thank you very much :-)
The theory behind cutting 4 angle on seat and 2 on valve and keep.I'd of seat to correct % is to create a venturi effect to aid lo ...
Converting my FXDLS to a full length rear fender, I'm chasing a Dyna rear tail light, or more specific ...
Hi again fellas,As well as a Breakout front fender to go on a Deuce with a 120 front tire, I am also chasing a detachable sissy ba ...
It's looking very very nice. Is that the Burly Slammer 10.5" Shocks you put on? How does the ride compare with the stock shocks?
They were for me, it may be a Windows issue. Should be ok now, let me know if it's not and I will fix.
I looked into the nix22 catridges and could only find ones to suit wide glide and all other models except fatbob
I've got one on the bike I just bought. Not sure about it, but the chain setup didn't come with the bike, it so I guess I'll see w ...
From what I have seen on the Net, this thread was a tame one. Usually when someone ask's a question like - 'what oil is best for m ...
Hi and thanks for any help Looking at this for sale on eBay foot pegs break and gear pads grips If you type this item No ...
Good article. I always reckon you learn more and get a greater backstory reading the reader comments. RIP
Anyone got a pair aof stock street bob mufflers in the sydney air canberra area they don't want?
reflowed with s/s G carby on same manifold head , this is what the flow bench moni ...
Nice machine, Jim. Is B4 stamped on the R-H side of the steering head and just for ...
