http://www.revzilla.com/common-tread/exclusive-leaked-pictures-of-the-new-harley-107-milwaukee-eight-engine
As a side note wazza, Be careful when sliding the Clarke Rubber stuff onto the grips, it tears fairly easy if you force it too muc ...
I got a 21 inch spoked rolled rim for sale off my softy
Possibly Timing chain or tensioner.
Not sure if anyone was following this post but ill update anyway. I have and 883 with a 1250cc kit fitted and tuned b ...
Fuck yeah these are sick! how dose it go in the turns being a bit higher, must be better than the standard sportster! ...
Have you checked the bolt holding the front of the tank near the stem? Might be loose. I forgot to tighten mine yesterday after re ...
You hit the nail on the head, Binnsy : Patience !!!! Your a lucky bugger having a sparky as a son in law ,Tom. Pulling the c ...
can help out if need to 97733436
Love my Mustang seat... only issue I have had is the two rubber feet do mark the guard...
Bike Sales QLD have reopened in Labrador
Hi Fontana, You probably won't want to mess around with heat ranges on the plugs ,as they are more about the temp range the engin ...
I think for the cost they should be replaced after about 3-4 years. Better than getting caught out. Have seen a couple go now and ...
Sounds like a plan! However, this Friday I have a day of shuffling the son around to the orthodontist, then the dentist, then back ...
Just fitted these to my Rocker C. What a difference! Along with the Danny Gray seat I now sit in the bike not on the bike. The ext ...
Cheers, I'll look into some more video's.
What i wrote in 'Cam coming on ' is probably relevant here.
Target tune is awsome. However, you can use your super tuner map as the original map or the current in PV, but you will need ...
Thanks for the report LordViykor. Was looking at the Road Glide Ultra myself but couldn't afford the extra coin so ended up wit ...
rear guard- if you run a straight edge or string line from the tip of your rear guard intersecting through the rear axle bolt the ...
