Anyone got any experience with the Progressive 422's or the Works performance softail shocks?? Both are very reasonably pr ...
Cool, now you just need a real HD Bakes
fuck 200psi dont you mean kpa
Yes Zyban, I've got those on my V-Star and they work well. Unfortunately though they dont get much use since the Fat Bob arrived. ...
Am in the process of buying a wide glide with a 95 build and 510 cams are these cams to big would i be better with 203 or 211,245 ...
Hi all, i have a set of fournales air shocks on my 07 nightster what pressure in psi should i have for solo riding i have a hand p ...
G'day all, When I ordered my 2010 roadking I had a pair V&H basic slip on mufflers put on and apparently tuned to suit at the fir ...
If you don't find anything with the compensator have a look at the adjuster, the later models with the auto adjuster sometimes don ...
I'm leaving on vacation for a few weeks today so I will not be here for that time. You can reach us at 310-669-8101 once I return ...
hi never heard of one but i just install new spring & bend the mount tabs around with a driff & hammer FLH (fucking la ...
Another old carbie guy here, Super Tuner is a dongle, (interface hardware) why its 800 bucks is cause it has HD stamped on i ...
Steve Look at the back of the TTS manual for the P/N's
Thanks mate, I was told because of the engine revving its ass of, it can cause extra wear, but thanks for the info mate. Rans
I just got a new speedo from Zanotti's and they had to get HD to dial in the k's. I told them the correct k's but in retrospect I ...
cheers mate, I'll get meself a 1/4 inch
Good luck with it m8, i was thinking about those same barrels i think 5 years back, but never went through with it, would be good. ...
from my Dyno days, They were great for development work and fault finding when breaking down at a certain rev or under a certain ...
I made a set of 2into 1 years ago and they need to be tuned length, that is both pipes need to be the same length at the collector ...
just my 00.02 worth on this. You say you swapped out the original ECM for the TM, I would be getting a TTS and then putting the o ...
Hiya, Have an 06 street bob for which i had to change stator, stator rotor kit coz of bolt had come loose and ripped the copper w ...
.jpg?v=638937893478370000)
